DBC File Viewer: Decode CAN Bus Signals

A DBC file describes how raw CAN bytes map to signals such as speed, temperature or voltage. Without it, you see hexadecimal values. With it, you see readable names and units. This page explains how to use a DBC file to read CAN and CAN FD data with SLSS CANAnalyser.

What a DBC file contains

A DBC file lists each message ID, the signals inside it, their position and length in the data bytes, scaling, offset and unit. Vehicle makers and suppliers often provide DBC files, and engineers create their own for custom networks.

Viewing live data with a DBC file

SLSS CANAnalyser supports DBC files, so incoming messages are decoded into physical values as you monitor. It handles two CAN 2.0 or CAN FD channels at once, so you can load a different database file for each channel.

Analysing recorded data

The integrated SLSS DataViewer lets you open recorded CAN data later and enrich it with DBC information, which makes physical values much easier to evaluate. You can view data in hex, decimal and binary, with ASCII in parallel.

Enhancing a recording with signal names

If a database file is loaded when you press Stop in SLSS CANAnalyser, the software asks whether to enhance the recorded log. Enhancing adds the readable signal data to the log, and saved or exported files (CSV or Excel) then include it. The logged data viewer guide describes the same process for older recordings, using the viewer’s load database and enhance buttons.

What you need

Frequently asked questions

Can I load more than one DBC file?

SLSS CANAnalyser analyses two channels at once, so you can load a different database file for each channel.

Why are my signals showing wrong values?

Usually the DBC file does not match the bus: the wrong bit rate, wrong byte order, or a DBC from another vehicle variant. Check the bit rate and CAN FD settings first.

Does it work with CAN FD?

Yes. SLSS CANAnalyser analyses CAN 2.0 and CAN FD, with DBC support.

Can I look at old recordings?

Yes. Open the recording in the DataViewer and apply the DBC information to see physical values.

Where do I get a DBC file?

From your vehicle maker, supplier or project team, or create one for your own network. The troubleshooting guide also has setup tips.

Shopping Cart
Scroll to Top