J2534 Pass-Through API for CAN and CAN FD
SAE J2534 is the standard that lets diagnostic and ECU reprogramming software talk to a vehicle through any compatible interface. If your OEM tool expects a J2534 device, you need a J2534 PassThru API for your hardware. SeRoSys provides the J2534 Passthrough API for its CAN dongles, so one device can serve your analysis work and your OEM tools.
What the J2534 Passthrough API does
- Implements SAE J2534-1/2 version 04.04.
- Works with Windows-based diagnostic tools.
- Supports raw CAN, ISO 15765 (ISO-TP) and CAN FD.
- Real-time CAN message transmission and reception.
- ECU reprogramming and configuration through driver-level integration.
Standards and extensions supported
- SAE J2534-1, API version 04.04.
- SAE J2534-2 extensions, including CAN FD, pin selection and dual-channel operation.
- GM GMW17753 CAN FD extension.
- Raw CAN, ISO 15765 (ISO-TP) and CAN FD.
The driver installs as a standard J2534 device, so any Windows tool that enumerates J2534 devices can select a Desk CAN Pro or Lab CAN Pro from its device list with no extra configuration.
Why it matters
Many OEM service and flashing tools only accept J2534 devices. With the SeRoSys J2534 Passthrough API installed, a Desk CAN Pro or Lab CAN Pro can be selected as that device, so one piece of hardware handles both analysis and J2534 work.
Using it with analysis
You can use the same dongle with SLSS CANAnalyser to watch the traffic while a tool is flashing or configuring an ECU. That is useful when you need to see exactly what the vehicle bus is doing during a session.
Who uses J2534
Repair engineers, validation teams and developers use J2534 when a vehicle maker requires it for software updates and ECU configuration. Having one dongle that also works as a CAN analyzer saves cost and bench space.
What you need
- A Windows 10 or later PC.
- A SeRoSys CAN dongle. Its matching license and serial number come with the hardware.
- A diagnostic or flashing tool that accepts third-party J2534 devices.
Once you have the hardware, the J2534 Passthrough API and its official installation and user manual are available on the Downloads page. The manual walks you through installation, setup and licensing step by step.
Check that your specific OEM tool supports third-party J2534 devices. Compatibility depends on the tool, so ask technical support if you are unsure about your case.
Frequently asked questions
Which hardware works with it?
The SeRoSys CAN dongles, including the Desk CAN Pro and Lab CAN Pro. The J2534 Passthrough API exposes them to Windows diagnostic tools as a J2534 device.
Which communication protocols are supported?
As described on the J2534 page, the SeRoSys J2534 PassThru API supports:
- Raw CAN: Standard CAN frame transmission and reception.
- ISO 15765 (ISO-TP): Diagnostic communication over CAN.
- CAN FD: CAN Flexible Data-Rate communication through the supported SAE J2534-2 CAN FD extensions.
- GM GMW17753: Support for the applicable GM CAN FD extension.
The API also supports the applicable J2534-2 extensions for pin selection and dual-channel operation.
J1850 support and the specific supported variants (PWM and/or VPW) should be confirmed against the current driver version and API manual.
For compatibility with a particular OEM diagnostic application, verify that the application supports third-party J2534 devices and the required extensions.
If you need a protocol that is not listed, ask technical support.
Does it work on Linux or macOS?
The J2534 Passthrough API is built for Windows-based diagnostic tools. J2534 itself is a Windows API standard.
Can I see the traffic during flashing?
Yes. Because the same dongle works with SLSS CANAnalyser, you can monitor the bus while another tool uses the J2534 interface, which helps when a reprogramming session fails and you need to see why.
Do I need a separate license?
The license for the J2534 Passthrough API is matched to your SeRoSys hardware and comes with the dongle. The software and manual are on the Downloads page. Contact technical support for questions about licensing for your tool.
