Free CAN Tools › DBC Decoder & Editor
Free Online DBC Editor & CAN Log Decoder
Open, edit and validate DBC files, simulate signal values byte-by-byte, and decode CAN / CAN FD logs — free, with nothing to install. Everything runs in your browser, so your files never leave your computer.
- Visual byte map – see exactly which bits each signal occupies, Intel or Motorola
- Drag-and-drop signal layout with overlap and out-of-range checks
- Signal simulator – move a slider, watch the payload bytes change
- Log decoder for Vector ASC & BLF, PEAK TRC, SLSS CSV & RCDF, candump and CSV, with signal plots
- CAN FD & 29-bit IDs, 64-bit and float signals, multiplexing, J1939 PGNs
- Lossless save – attributes, comments and value tables are preserved
Example
Click Load sample in the tool. The sample database contains a classic 8-byte Vehicle_Messages frame, a multiplexed Battery_Status message using Motorola byte order, and two CAN FD messages with 64-bit signals. Select Vehicle_Messages and drag the Speed slider to 120 km/h: the tool encodes 12000 (raw) into bytes 0–1 as E0 2E (Intel, least-significant byte first) and highlights the bytes that changed. Switch to the Log Decoder tab to see the same signals decoded and plotted from a 20-second CAN FD log.
How it works
A DBC signal is defined by a start bit, a length, a byte order and a value type. The raw integer extracted from the payload is converted to a physical value with physical = raw × factor + offset. For Intel (little-endian, @1) signals the start bit is the least-significant bit and the signal grows towards higher bit numbers. For Motorola (big-endian, @0) signals the start bit is the most-significant bit and the signal continues into the following byte. The byte map draws exactly that bit walk, marking each signal’s MSB and LSB, so byte-order mistakes are easy to spot.
When decoding a log, each frame is matched to a DBC message by identifier (11-bit or 29-bit). Multiplexed signals are only decoded when the multiplexor switch carries their value; extended multiplexing (SG_MUL_VAL_) is supported.
Frequently asked questions
What is a DBC file?
A DBC file is a CAN database: it lists the messages on a CAN or CAN FD network (ID, length, transmitter) and the signals packed inside each one — start bit, length, byte order, scaling factor and offset, unit and value descriptions. Tools use it to turn raw bytes into readable values such as vehicle speed or battery voltage.
Is this DBC editor really free? Are my files uploaded?
Yes, it is free with no sign-up. The tool runs entirely in your browser, so your DBC files and logs are never uploaded to SeRoSys or anyone else — you can use it with confidential OEM databases.
Which CAN log formats can it decode?
Vector ASC (hex or decimal base, Classic CAN and CAN FD) and Vector BLF, PEAK PCAN-View TRC (versions 1.x and 2.x), SLSS CANAnalyser CSV and RCDF exports, Linux SocketCAN candump logs and generic CSV files. See CAN log file formats for more on each format.
Does it support CAN FD and extended IDs?
Yes. Messages up to 64 bytes, 11-bit and 29-bit identifiers, the VFrameFormat attribute used by CANdb++, and 64-bit and IEEE float/double signals. For 29-bit IDs it also shows the J1939 PGN, source address and priority.
What is the difference between Intel and Motorola byte order?
Intel (little-endian, @1 in the DBC) stores the least significant byte first and the start bit is the signal’s LSB. Motorola (big-endian, @0) stores the most significant byte first and the start bit is the MSB. The byte map shows exactly which bits each signal uses, with its MSB and LSB marked.
How does the signal simulator work?
Select a message in the editor and drag the slider next to any signal. The tool encodes the physical value into the payload in real time, highlights the bytes that changed and updates the byte map. You can also type a value, pick an enum state, or paste a hex payload to see how it decodes.
Can it handle multiplexed signals?
Yes. Multiplexor switches (M), multiplexed signals (m0, m1…) and extended multiplexing (SG_MUL_VAL_) are decoded, and the byte map lets you view each multiplexer page.
How do I decode live CAN traffic with my DBC?
Connect a Desk CAN Pro or Lab CAN Pro interface and use SLSS CANAnalyser, which decodes live and recorded CAN and CAN FD data with your DBC. See the DBC file viewer page for details.
Related free CAN tools
Generate simulated CAN / CAN FD traffic from sine, ramp, counter and step waveforms — export ASC, TRC, candump or CSV.%Bus Load Calculator
Estimate bus utilisation from a message schedule, a DBC file or a recorded log — Classic CAN, CAN FD and BRS.TPISO-TP Log Decoder
Find and reassemble ISO-TP (ISO 15765-2) transfers in CAN and CAN FD logs — UDS, OBD-II and segmented broadcasts.0xHex / Decimal / Binary Converter
Convert numbers, CAN IDs and payload bytes between hex, decimal and binary — with J1939 PGN decoding.
See all free CAN tools.
Built by SeRoSys Technology. Decode live traffic with your DBC using SLSS CANAnalyser and a Desk CAN Pro or Lab CAN Pro interface.
