An Alternative to Ixxat USB-to-CAN FD Pro
The Ixxat USB-to-CAN FD Pro from HMS Networks is a two-channel USB CAN FD interface with a strong industrial reputation. If you are comparing it with other tools, this page explains how the SeRoSys dual-channel USB CAN FD analyzer compares, and where each one fits best. Specifications for Ixxat come from HMS Networks’ product page and datasheet (checked October 2026). Please check HMS for current details.
Ixxat USB-to-CAN FD Pro at a glance
- Two CAN FD channels, with data rates up to 8 Mbit/s.
- 1 kV DC galvanic isolation for one minute.
- Two RJ45 CAN connectors (CiA 303-1), supplied with two RJ45-to-DB9 cables.
- USB-C connection, USB 2.0 High Speed.
- Driver support for VCI and ECI, plus SocketCAN on Linux.
- The canAnalyser3 Mini analysis software is included.
How Desk CAN Pro compares
The Desk CAN Pro also has two CAN 2.0 and CAN FD channels. According to the technical specifications, the CAN FD data phase runs up to 10 Mbit/s, timestamps have 1 microsecond resolution, and there is a 1,000,000-message ring buffer. It has male and female DB9 connectors for bus passthrough, software-controlled termination and a standalone send mode.
The SLSS CANAnalyser software is included with a lifetime license. It offers DBC decoding, logging, the DataViewer for post-analysis, and a TCP/IP interface and Python class for automation. The Desk CAN Pro costs $389 as a one-time purchase.
Price and software
Reseller prices we found in October 2026 (excluding VAT) were about EUR 630 for the Ixxat hardware, with the larger canAnalyser3 editions priced separately from about EUR 1,772 (Lite) to EUR 3,279 (Standard). The bundled canAnalyser3 Mini is more limited. Prices vary by reseller and region, so please confirm them before buying.
Where Ixxat is the better choice
- You need documented galvanic isolation of 1 kV for noisy or high-voltage environments.
- You work on Linux and want SocketCAN support from the vendor.
- Your organisation already standardises on HMS/Ixxat drivers and tools (VCI or ECI).
- You prefer a connector layout based on CiA 303-1 RJ45.
Where Desk CAN Pro is the better choice
- You want DB9 passthrough to tap an existing bus without extra cables.
- You want analysis software with DBC decoding, logging and scripting included for a one-time price.
- You need CAN FD data rates up to 10 Mbit/s.
- Budget matters: one purchase covers hardware and software.
Frequently asked questions
Is Desk CAN Pro a drop-in replacement for the Ixxat interface?
Not necessarily. If your tools depend on Ixxat VCI or ECI drivers, they will not work directly with other hardware. SeRoSys offers a J2534 PassThru driver for tools that support J2534.
How does this compare with PEAK?
See our PCAN-USB FD alternative page and the full PCAN-USB FD and Ixxat comparison.
Where can I get help choosing?
Describe your setup to technical support and we will tell you honestly which tool fits.
